It's been a while since I posted anything, and as anyone who actually read this may have guessed...
that's because I havn't made anything...
well that's not strictly true, I havn't made anything worth writing about...
I have started a few projects though.
for instance...
I'm making a tab welder, it's very simple, heres the theory.
welding is a simple process, you take two metals, heat them till they melt, when they have melted the mix, as they cool they harden, attached to each other...
a tab welding welds thins strips of metal together by momentarily melting them with some very high current, they are normally used to join plates to batteries when making a battery pack.
the long and the short of it is that you charge a capacitor, then you discharge it through the surfaces that you want to weld, the capacitor discharges very quickly, and because the resistance of the materials is so low, a large amount of current is draw from the capacitor, large current = large heat, large heat = metal melted and fused...
simple huh?
Anyone who is still confused should google "spot welding",
well... when I say capacitor, I actually mean capacitor bank. I'm using 33,000 uF caps, and plan to have about 200 in my cap bank, simply because I have a regular supply of junk equipment that use these and I can take them out prior to disposal...
it's all about keeping the costs down...
at the moment, (with only 30 caps), I can attach a single strand of copper wire to a slot blanking plate from a computer case...
so I'm hoping that a couple of hundred caps will enable me to weld things from the reasonably thick, to the very thin... altering the amount (time) of current available with the amount I charge the cap bank to.
No comments:
Post a Comment